機器 / Ulthera System
DermaCryo業務用美容機器
DS 4-4.5 DeepSEEトランスデューサー搭載HIFU治療システム
レビューはまだありません1 台USD 1,199
10 台USD 1,175.02
100 台USD 1,151.52
主な仕様
- Image depth
- up to 8 millimeters
- Scan length
- 25 mm
- Transducer type DS 7-3.0 treat frequency
- 7 MHz
- Transducer type DS 7-3.0 treat depth
- 3.0 mm
- Transducer type DS 4-4.5 treat frequency
- 4 MHz
- Transducer type DS 4-4.5 treat depth
- 4.5 mm
類似製品
主な仕様
| Image depth | up to 8 millimeters |
|---|---|
| Scan length | 25 mm |
| Transducer type DS 7-3.0 treat frequency | 7 MHz |
| Transducer type DS 7-3.0 treat depth | 3.0 mm |
| Transducer type DS 4-4.5 treat frequency | 4 MHz |
| Transducer type DS 4-4.5 treat depth | 4.5 mm |
| Transducer type DS 10-1.5N treat frequency | 10 MHz |
| Transducer type DS 10-1.5N treat depth | 1.5 mm |
| Transducer type DS 10-1.5N scan length | 14 mm |
| Electrical input | 100-240 VAC, 50-60 Hz |
| Ventilation clearance | at least 4 inches/ 10 cm |
| Control unit ingress protection | IPx0 |
| Mated transducer and handpiece ingress protection | IPx1 |
| Ready state timeout | 40 seconds |
レビュー
製品レビューはまだ公開されていません。
店舗レビューはまだ公開されていません。
サプライヤー
DermaCryo製品構成と運賃について営業チームにお問い合わせください。
製品説明
Ultheraシステムは、超音波イメージングと集束超音波治療を組み合わせ、非侵襲的な皮膚科美容用途に対応します。DS 4-4.5 DeepSEEトランスデューサーにより、より深い組織レベルでの治療が可能となり、眉毛のリフトや、弛緩したsubmentalおよび頸部組織の改善を目的とした処置をサポートします。統合されたイメージング機能により、エネルギー照射前に皮膚および皮下領域の可視化が可能となり、トランスデューサー表面に標示された治療ライングリッドに沿った適切な接触と正確なターゲティングを確保するのに役立ちます。システムは、設定された時間が経過するとレディ状態からタイムアウトし、制御された操作の維持を支援します。ハンドピースには、処置中の明確な状態管理のための専用SEEボタンおよびTREATボタンが装備されています。ラッチ機構により使用時のトランスデューサー固定が確保され、コントロールユニットはタッチスクリーンインターフェースを通じてリアルタイムパラメータを表示します。システムの動作には専用のUser Access Keyが必要であり、標準的な国際電源に接続することで、臨床現場での柔軟な導入が可能です。
| 項目 | 仕様 |
|---|---|
| モデル | Ulthera System |
| Image depth | up to 8 millimeters |
| Scan length | 25 mm |
| Transducer type DS 7-3.0 treat frequency | 7 MHz |
| Transducer type DS 7-3.0 treat depth | 3.0 mm |
| Transducer type DS 4-4.5 treat frequency | 4 MHz |
| Transducer type DS 4-4.5 treat depth | 4.5 mm |
| Transducer type DS 10-1.5N treat frequency | 10 MHz |
| Transducer type DS 10-1.5N treat depth | 1.5 mm |
| Transducer type DS 10-1.5N scan length | 14 mm |
| Electrical input | 100-240 VAC, 50-60 Hz |
| Ventilation clearance | at least 4 inches/ 10 cm |
| Control unit ingress protection | IPx0 |
| Mated transducer and handpiece ingress protection | IPx1 |
| Ready state timeout | 40 seconds |