機器 / Ulthera System
DermaCryo業務用美容機器
DS 10-1.5N振動子搭載 表在層HIFU用
レビューはまだありません1 台USD 1,199
10 台USD 1,175.02
100 台USD 1,151.52
主な仕様
- Image depth
- up to 8 millimeters
- Scan length
- 25 mm
- Transducer type DS 7-3.0 treat frequency
- 7 MHz
- Transducer type DS 7-3.0 treat depth
- 3.0 mm
- Transducer type DS 4-4.5 treat frequency
- 4 MHz
- Transducer type DS 4-4.5 treat depth
- 4.5 mm
類似製品
主な仕様
| Image depth | up to 8 millimeters |
|---|---|
| Scan length | 25 mm |
| Transducer type DS 7-3.0 treat frequency | 7 MHz |
| Transducer type DS 7-3.0 treat depth | 3.0 mm |
| Transducer type DS 4-4.5 treat frequency | 4 MHz |
| Transducer type DS 4-4.5 treat depth | 4.5 mm |
| Transducer type DS 10-1.5N treat frequency | 10 MHz |
| Transducer type DS 10-1.5N treat depth | 1.5 mm |
| Transducer type DS 10-1.5N scan length | 14 mm |
| Electrical input | 100-240 VAC, 50-60 Hz |
| Ventilation clearance | at least 4 inches/ 10 cm |
| Control unit ingress protection | IPx0 |
| Mated transducer and handpiece ingress protection | IPx1 |
| Ready state timeout | 40 seconds |
レビュー
製品レビューはまだ公開されていません。
店舗レビューはまだ公開されていません。
サプライヤー
DermaCryo製品構成と運賃について営業チームにお問い合わせください。
製品説明
Ultheraシステムは、リアルタイム超音波イメージングと集束治療出力を単一の統合プラットフォームで実現します。DS 10-1.5N振動子は、システムの機能をより表在層の組織層まで拡張し、DS 7-3.0およびDS 4-4.5振動子で利用可能な深部治療オプションを補完します。この構成は、眉のリフトや顎下および頸部の弛緩組織治療など、Ultheraプラットフォームでの使用が適応とされる非侵襲的皮膚科美容アプリケーションをサポートします。卓上制御ユニットには、手順ガイダンス用の統合タッチスクリーンインターフェースを搭載し、ハンドピース設計には、臨床ワークフロー効率のための専用SEEおよびTREATプッシュボタンと、確実な振動子ラッチ機構を備えています。赤い緊急停止ボタンと緑のOn/Offスタンバイ制御により、即時の操作アクセスが可能で、メイン電源スイッチは背面パネルに配置されています。本システムは、USBポート認証用の専用User Access Keyを必要とし、標準的な臨床電圧範囲をサポートする国際電源で動作します。
| 項目 | 仕様 |
|---|---|
| モデル | Ulthera System |
| Image depth | up to 8 millimeters |
| Scan length | 25 mm |
| Transducer type DS 7-3.0 treat frequency | 7 MHz |
| Transducer type DS 7-3.0 treat depth | 3.0 mm |
| Transducer type DS 4-4.5 treat frequency | 4 MHz |
| Transducer type DS 4-4.5 treat depth | 4.5 mm |
| Transducer type DS 10-1.5N treat frequency | 10 MHz |
| Transducer type DS 10-1.5N treat depth | 1.5 mm |
| Transducer type DS 10-1.5N scan length | 14 mm |
| Electrical input | 100-240 VAC, 50-60 Hz |
| Ventilation clearance | at least 4 inches/ 10 cm |
| Control unit ingress protection | IPx0 |
| Mated transducer and handpiece ingress protection | IPx1 |
| Ready state timeout | 40 seconds |