Apparecchiature / Ulthera System
Con pulsante di arresto di emergenza sul pannello frontale
Nessuna recensioneCaratteristiche principali
- Image depth
- up to 8 millimeters
- Scan length
- 25 mm
- Transducer type DS 7-3.0 treat frequency
- 7 MHz
- Transducer type DS 7-3.0 treat depth
- 3.0 mm
- Transducer type DS 4-4.5 treat frequency
- 4 MHz
- Transducer type DS 4-4.5 treat depth
- 4.5 mm
Prodotti simili
Caratteristiche principali
| Image depth | up to 8 millimeters |
|---|---|
| Scan length | 25 mm |
| Transducer type DS 7-3.0 treat frequency | 7 MHz |
| Transducer type DS 7-3.0 treat depth | 3.0 mm |
| Transducer type DS 4-4.5 treat frequency | 4 MHz |
| Transducer type DS 4-4.5 treat depth | 4.5 mm |
| Transducer type DS 10-1.5N treat frequency | 10 MHz |
| Transducer type DS 10-1.5N treat depth | 1.5 mm |
| Transducer type DS 10-1.5N scan length | 14 mm |
| Electrical input | 100-240 VAC, 50-60 Hz |
| Ventilation clearance | at least 4 inches/ 10 cm |
| Control unit ingress protection | IPx0 |
| Mated transducer and handpiece ingress protection | IPx1 |
| Ready state timeout | 40 seconds |
Recensioni
Non sono ancora state pubblicate recensioni del prodotto.
Non sono ancora state pubblicate recensioni del negozio.
Fornitore
Descrizione del prodotto
Il Sistema Ulthera incorpora un prominente pulsante di arresto di emergenza rosso sul pannello frontale della sua unità di controllo da tavolo, consentendo la cessazione immediata di tutte le operazioni del sistema quando necessario. Questo controllo di sicurezza funziona insieme al pulsante SEE dell'handpiece per interrompere il trattamento in corso, offrendo ai professionisti più modalità di risposta durante le procedure. Il sistema combina imaging a ultrasuoni con erogazione della terapia per trattamento dermatologico estetico non invasivo del sopracciglio e del tessuto lassista submentale e del collo. Un pulsante verde On/Off di standby fornisce l'attivazione di routine, mentre l'interruttore di alimentazione principale sul pannello posteriore gestisce le sequenze di avvio e spegnimento. La chiave proprietaria di accesso utente si inserisce in una porta USB per autenticare il personale autorizzato prima dell'inizio dell'operazione. I trasduttori intercambiabili image/treat si collegano all'handpiece con un meccanismo a scatto, e l'interfaccia touchscreen visualizza la visualizzazione a ultrasuoni in tempo reale per guidare il posizionamento del trattamento. Il sistema opera su alimentazioni di potenza internazionali e richiede adeguata clearance di ventilazione durante l'uso.
| Parametro | Specifica |
|---|---|
| Modello | Ulthera System |
| Image depth | up to 8 millimeters |
| Scan length | 25 mm |
| Transducer type DS 7-3.0 treat frequency | 7 MHz |
| Transducer type DS 7-3.0 treat depth | 3.0 mm |
| Transducer type DS 4-4.5 treat frequency | 4 MHz |
| Transducer type DS 4-4.5 treat depth | 4.5 mm |
| Transducer type DS 10-1.5N treat frequency | 10 MHz |
| Transducer type DS 10-1.5N treat depth | 1.5 mm |
| Transducer type DS 10-1.5N scan length | 14 mm |
| Electrical input | 100-240 VAC, 50-60 Hz |
| Ventilation clearance | at least 4 inches/ 10 cm |
| Control unit ingress protection | IPx0 |
| Mated transducer and handpiece ingress protection | IPx1 |
| Ready state timeout | 40 seconds |