Apparecchiature / Ulthera System
Manipolo con comandi SEE e TREAT
Nessuna recensioneCaratteristiche principali
- Image depth
- up to 8 millimeters
- Scan length
- 25 mm
- Transducer type DS 7-3.0 treat frequency
- 7 MHz
- Transducer type DS 7-3.0 treat depth
- 3.0 mm
- Transducer type DS 4-4.5 treat frequency
- 4 MHz
- Transducer type DS 4-4.5 treat depth
- 4.5 mm
Prodotti simili
Caratteristiche principali
| Image depth | up to 8 millimeters |
|---|---|
| Scan length | 25 mm |
| Transducer type DS 7-3.0 treat frequency | 7 MHz |
| Transducer type DS 7-3.0 treat depth | 3.0 mm |
| Transducer type DS 4-4.5 treat frequency | 4 MHz |
| Transducer type DS 4-4.5 treat depth | 4.5 mm |
| Transducer type DS 10-1.5N treat frequency | 10 MHz |
| Transducer type DS 10-1.5N treat depth | 1.5 mm |
| Transducer type DS 10-1.5N scan length | 14 mm |
| Electrical input | 100-240 VAC, 50-60 Hz |
| Ventilation clearance | at least 4 inches/ 10 cm |
| Control unit ingress protection | IPx0 |
| Mated transducer and handpiece ingress protection | IPx1 |
| Ready state timeout | 40 seconds |
Recensioni
Non sono ancora state pubblicate recensioni del prodotto.
Non sono ancora state pubblicate recensioni del negozio.
Fornitore
Descrizione del prodotto
Il manipolo del sistema Ulthera funge da interfaccia operatore principale per le funzioni di imaging e terapia. È dotato di pulsanti dedicati SEE e TREAT che consentono il controllo diretto degli stati del sistema durante le procedure. Il pulsante SEE attiva l'imaging, porta il sistema in stato di pronto e può interrompere il trattamento in corso. I pulsanti TREAT attivano lo stato di terapia per l'erogazione di energia acustica. Un meccanismo di bloccaggio integrato fissa saldamente i trasduttori nel ricettacolo, garantendo una connessione affidabile durante l'uso. Il manipolo si collega all'unità di controllo tramite un cavo con scarico di trazione progettato per la manovrabilità clinica. I trasduttori si inseriscono con un tono di conferma udibile e vengono rilevati automaticamente dal sistema al momento della connessione. Il manipolo e il trasduttore accoppiato dispongono di protezione IPx1 contro l'ingresso di acqua che gocciola verticalmente. L'ispezione regolare dei connettori e la manipolazione attenta contribuiscono a mantenere le prestazioni e la copertura della garanzia.
| Parametro | Specifica |
|---|---|
| Modello | Ulthera System |
| Image depth | up to 8 millimeters |
| Scan length | 25 mm |
| Transducer type DS 7-3.0 treat frequency | 7 MHz |
| Transducer type DS 7-3.0 treat depth | 3.0 mm |
| Transducer type DS 4-4.5 treat frequency | 4 MHz |
| Transducer type DS 4-4.5 treat depth | 4.5 mm |
| Transducer type DS 10-1.5N treat frequency | 10 MHz |
| Transducer type DS 10-1.5N treat depth | 1.5 mm |
| Transducer type DS 10-1.5N scan length | 14 mm |
| Electrical input | 100-240 VAC, 50-60 Hz |
| Ventilation clearance | at least 4 inches/ 10 cm |
| Control unit ingress protection | IPx0 |
| Mated transducer and handpiece ingress protection | IPx1 |
| Ready state timeout | 40 seconds |